Fast Shower Repair in Lilburn, GA

Tell-tale signs are a stain or soft spot on the ceiling or wall below the bathroom, a musty smell, peeling paint, or grout that stays dark and damp. Because water travels along framing before it shows, the visible spot is rarely above the actual leak - we trace it to the real source before opening anything.

Almost always the valve, not the head. When water keeps trickling from the head after you've shut the handle off, the cartridge or seals inside the valve aren't sealing - a common, quick repair. A head that only sprays unevenly is usually just mineral buildup we can clean or a head we can swap.

Most often it's mineral scale clogging the showerhead or the valve screen, which we can clean or replace quickly. If pressure fell across the whole house or a valve is failing internally, the cause is deeper in the plumbing - we check that before assuming it's just the head.

Many shower repairs - a cartridge, a diverter, a head, or re-sealing - are done in about an hour to ninety minutes. Chasing a hidden leak or replacing a valve behind the wall takes longer; we'll give you an honest time and a flat price once we've found the source.

Only if the leak is in the valve body or a supply line behind the tile. Head, diverter, cartridge, and sealing repairs are done from the front. When wall access is unavoidable, we keep the opening as small and clean as possible and prep it for patching.

Usually, yes. Most leaks come from a failed cartridge, valve, diverter, drain, or worn grout and caulk - all repairable without a rebuild. Re-tiling only comes into play when water has already damaged the substrate or the shower pan itself has cracked, which we'll show you if we find it.

Often it is. A slow leak at the valve, pan, or drain keeps the wall cavity or subfloor damp, which feeds mold and mildew you can smell before you can see. Surface cleaning won't stop it - the fix is finding and repairing the water source, which is what we do first.

Yes. A cracked pan or a leaking drain connection is a frequent cause of water showing up on the floor below, and it's easy to mistake for a valve leak. We test the drain and pan as part of tracing the leak so we fix the actual failure, not just the nearest suspect.