Licensed · Veteran-Owned · Master Plumber MP211014

Trusted Plumbing Leak Repair in Lilburn, GA

A drip under the sink that never stops, a ceiling stain that keeps spreading, or a pipe joint weeping inside a wall - every plumbing leak wastes water and quietly damages the house until it's fixed right. Stars and Pipes Plumbing Atlanta repairs leaks at fixtures, supply lines, pinholes, and main lines across Gwinnett County for an upfront flat price. Veteran-owned, master-licensed (MP211014).

Call 770-398-STAR
Corroded copper water lines leaking beneath a kitchen slab, repaired by Stars and Pipes Plumbing Atlanta in Lilburn, GA

Leaks we repair

  • Dripping or pooling under a sink

    A worn angle stop, a loose supply line, a failing P-trap, or a tired compression fitting.

  • Pinhole leaks in copper pipe

    Corrosion from years of Metro Atlanta water chemistry eating through the wall - often the first of several to come.

  • Water stain spreading on a ceiling or wall

    A supply or drain line leaking above the finished surface, showing up feet from the actual source.

  • Leaking pipe joint or fitting

    A failed solder joint, a cracked fitting, or an over-stressed connection weeping under pressure.

  • Water pooling at the base of the water heater

    A leaking connection, T&P valve, or drain valve - repairable, versus a corroded tank that needs replacing.

  • Dripping outdoor spigot or hose bib

    A worn washer, a cracked valve body, or a freeze-split sillcock behind the wall.

  • Water seeping around the base of a toilet

    A failed wax ring, a loose supply line, or a cracked tank or bowl letting water onto the floor.

  • Leaking main water line in the yard

    A break in the service line between the meter and the house, often surfacing as a wet strip in the lawn.

Rated 5.0 by Local Homeowners

What our customers say

Repair or replace?

Most leaks are a targeted repair - one fitting, one section, one valve. When the same line keeps failing, or the pipe is aging polybutylene or corroded galvanized, replacing the run (or repiping the home) is the fix that actually lasts.

Repair usually makes sense when…

  • The leak is at a single fitting, valve, or short section
  • The surrounding pipe is sound copper or PEX
  • It's the first leak on that line, not a repeat
  • The material has years of service left in it

Lean toward replacement when…

  • The pipe is polybutylene or corroded galvanized steel
  • The same line has leaked more than once
  • Pinhole leaks are showing up in several spots
  • The run is buried, hard to reach, or failing end to end

What to expect

  1. We find the exact source first - visible or hidden - and show you what failed before quoting a price
  2. One upfront, flat price to repair, approved before we start; no hourly meter
  3. We repair to Georgia code with the right material for the pipe - never a temporary patch that reopens next month
  4. Pressure-test the repair and check your house pressure, since high pressure quietly drives a lot of leaks

What it costs: You get a flat, upfront price for the repair before any work starts - and most leaks cost a fraction of the water damage they cause if they run. No hourly surprises and no marked-up parts.

Call 770-398-STAR

Brands & parts we service

Common parts we replace

  • angle stops & supply lines
  • compression & push-to-connect fittings
  • copper repair couplings
  • PEX fittings & manifolds
  • pipe sections (copper, PEX, CPVC)
  • hose bibs & frost-free sillcocks
  • pressure-reducing valves
  • wax rings & toilet supplies

Frequently asked questions

How much does it cost to fix a leaking pipe?

It depends on where the leak is and what failed, but you always get a flat, upfront price before any work begins - no hourly meter. A visible fitting or supply-line leak is usually a modest fix; a leak hidden in a wall, ceiling, or slab costs more because of the access, which is exactly why pinpointing it precisely first keeps the bill down.

Can you just repair the leak, or do I need to replace the whole pipe?

Usually a repair. One weeping joint or a single failed section on an otherwise sound copper or PEX line is a targeted fix. Replacement or a repipe only makes sense when the pipe material itself is failing - corroded galvanized, brittle polybutylene, or copper that keeps springing new pinholes - and we'll tell you honestly which one you're dealing with.

Why does my copper pipe have a pinhole leak?

Pinholes come from corrosion working through the pipe wall from the inside, driven by water chemistry, high pressure, and age. The frustrating part is that the first pinhole is often a sign the rest of that run is thinning too, so if we're seeing repeat pinholes we'll walk you through whether repairing the spots or replacing the run is the better value.

Do you repair the drywall after fixing a leak?

We open only what we need to reach the leak and we close that access cleanly, but full drywall finishing and painting to match can be a separate scope - we'll tell you up front what's included versus what a drywall or restoration finish would add, so there are no surprises.

Will Gwinnett County lower my bill after I fix a leak?

Leaks on your side of the meter are the homeowner's to repair, but Gwinnett County Water Resources does handle leak billing questions, and many Georgia utilities grant a one-time adjustment when you document a timely repair. We provide an invoice showing the leak and the fix so you can submit it to Customer Care - the credit is theirs to approve, but we make sure you have the paperwork.

Is a small leak really worth fixing right away?

Yes. A slow drip does two expensive things quietly: it wastes water around the clock - even a pinhole can run thousands of gallons a month - and it wicks into framing, subfloor, and drywall until you're paying for rot and mold instead of a quick repair. Catching it early is almost always the cheapest version of the problem.

Do you fix main water line leaks in the yard?

Yes. When the leak is on the buried service line between the meter and the house - usually showing as a soggy strip or a greener line in the lawn - we locate the break and repair or replace the failed section, then restore the ground. If the line is old and failing along its length, we'll lay out replacement instead of a patch that leaks again.

How fast can you come out for an active leak?

We prioritize active leaks and dispatch same-day whenever the schedule allows. If water is spreading and you can't stop it, shut off the main at the meter or where the line enters the house, then call 770-398-STAR and we'll give you the soonest window.

Leak repair across Gwinnett County

Where a leak turns up usually tells us what’s behind it - pinholes in the copper of 1980s–2000s Gwinnett subdivisions and aging Dunwoody ranches, corroded galvanized in older Tucker and Decatur homes, and split hose bibs or polybutylene fittings across Snellville, Lawrenceville, Johns Creek, and Duluth. We trace the leak to its actual source and repair it wherever you are across the neighborhoods we cover throughout Metro Atlanta.

A single weeping joint is a quick fix; the same line leaking twice is telling you something. When a pipe is corroding or failing end to end, a lasting repair may mean replacing the run rather than patching it again - one of several judgment calls behind the plumbing repairs we handle day to day. We’ll tell you honestly which side of that line your leak falls on - the same call we make on the polybutylene still in plenty of Grayson subdivisions.

Where we work

Cities we serve across Metro Atlanta

  • Lawrenceville
  • Lilburn
  • Tucker
  • Snellville
  • Dunwoody
  • Doraville
  • Johns Creek
  • Suwanee
  • Norcross
  • Buford
  • Loganville
  • Duluth
  • Grayson
  • Decatur
  • Stone Mountain
  • Cumming
  • Buckhead
  • Peachtree Corners
  • Sandy Springs
  • Alpharetta
  • Roswell
  • Marietta
  • Brookhaven

Need plumbing leak repair today?

Talk to a licensed plumber now - upfront pricing, no surprises.

Call 770-398-STAR